Saskatchewan Professional Driver Test 05

Suppose you’re preparing to take your Saskatchewan Commercial Driver Licence Test or Saskatchewan Truck Driver Test. In that case, it’s essential that you feel confident and well-prepared before sitting for the official exam. One way to increase your preparedness is by taking advantage of the free SASK Driver Practice Test. This resource can help you familiarize yourself with the format and types of questions you can expect to find on the actual exam.

1 / 30

Power Units registered in a commercial class (A, C, D or LV) at or above 11,794 kg and operating extra-provincially must be periodically inspected...

Every 90 days

Every 6 months

Every month

Every 12 months

2 / 30

Which inspection schedule applies to buses used for the transportation of passengers with a designated seating capacity of more than 10, including the driver, but excluding the operation for personal use, and also applied to any trailer towed by a bus?

Schedule 1

Schedule 5

Schedule 2

Schedule 3

3 / 30

Which inspection schedule applies only to a motor coach equipped with air ride suspension, air brakes and automatic brake adjusters?

Schedule 3

Schedule 2

Schedule 4

Schedule 1

4 / 30

During a trip inspection of the hoses for class 1, which of the following is not checked?

Fraying

Poor connections

Leaks

Proper size

5 / 30

While inspecting the brake pedal, the total pedal travel does not exceed how far of the total available travel when heavy force is applied?

80%

60%

90%

75%

6 / 30

A fire extinguisher must be present in commercial vehicles wider than...

1,900 mm

1,980 mm

2,140 mm

2,060 mm

7 / 30

When should truck operators report to weigh scales?

Weekdays

When so directed by an official highway sign

At the beginning of a run

When it's scheduled

8 / 30

A tridem axle group or tandem axle group manufactured after June 1988 must not have a width less than how far measured from outside to outside tires?

1.9 m

2.1 m

2.8 m

2.5 m

9 / 30

Which inspection schedule do trucks, tractors and trailers or combinations of them exceeding a GVW or RGVW of 11,794 kg require?

Schedule 2

Schedule 1

Schedule 4

Schedule 5

10 / 30

A building, object or contrivance must not exceed how many metres in width?

2.9 metres

2.3 metres

3.2 metres

2.6 metres

11 / 30

Which statement is false? While inspecting a class 1 vehicle on a daily inspection, all suspension components on each axle must be secure and not damaged, including...

Loose U-bolts

Leaking shocks

Air bags are too firm

Cracked or broken springs

12 / 30

Which of the following vehicle do not require a daily inspection?

All commercial vehicles (trucks/power units) with a registered gross vehicle weight of more than 11,794 kg

Buses with a seating capacity of more than 10 people

Any trailers or semi-trailers being towed

Vans with a cargo capacity of more than 500 cubic feet

13 / 30

While inspecting tires on class 1 vehicle, which of the following is not part of the daily inspection?

Adequate tread depth

Ensure the tires are touching each other

Damages, cuts or bulges on the sidewall

Tread separation

14 / 30

Trucks registered in a commercial class (A, C or D) at or above 22,000 kg, operating within Saskatchewan only must be periodically inspected...

Every 12 months

Every day

Every 6 months

Every month

15 / 30

A bus / van registered in a commercial class (PC, PB and PS), operating within Saskatchewan only must be periodically inspected...

Every 12 months

Every 2 years

Every 90 days

Every 6 months

16 / 30

Amber flashing lights are required on most units carrying what type of load?

All of these

Toxic

Flammable

Over-dimension

17 / 30

During a trip inspection for class 1, which of the following is not checked with the belts?

Tension

Wear

Cracks and fraying

Age

18 / 30

Liquefied Petroleum Gas (LPG), Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) must be periodically inspected...

Every 3 years

Every 12 months

Every 6 months

Every 5 years

19 / 30

While inspecting the battery on class 1 vehicles, which of the following is not part of the daily inspection?

Make sure the battery compartment cover is on and securely attached

Make sure the batteries and the battery cables are secure

Check for corrosion and leaks

Check the water level in the cylinders

20 / 30

While inspecting a class 1 vehicle's accelerator on a daily inspection, after pressing and releasing the accelerator, what are you looking for?

The amount of rpm

The sounds of the rpm

All of these

Binding or sticking

21 / 30

A tandem axle group on a semi trailer manufactured after December 1991 must not have width less than how many metres measured from outside to outside tires?

2.5 metres

2.1 metres

1.8 metres

2.8 metres

22 / 30

Before beginning a class 1 trip inspection, which of the following is not done?

Turn the lights on

Shut off the engine

Set the parking brakes

Block the wheels

23 / 30

Which statement is false? All fluids must be at a safe operating level, including...

Engine oil (check when engine is hot)

Windshield washer fluid

Power steering fluid

Engine coolant (do not remove radiator cap)

24 / 30

Which of the following information is not required in a daily inspection schedule?

Inspection date and time

Licence plate or unit number of the vehicle and any trailers being towed by that vehicle

Odometer reading of the vehicle

Driver's license number

25 / 30

While inspecting the fuel tanks on class 1 vehicle, which of the following is not part of the daily inspection?

Fuel lines are secure and there is no fuel leaking

Fuel cap is on and secure

Tank is secure and the straps are not loose

There is no excessive odor

26 / 30

What is the maximum height of a vehicle, building, object or contrivance is unless otherwise expressed in a permit?

4.35 metres

4.15 metres

3.85 metres

3.75 metres

27 / 30

A house trailer being moved between sunrise and sunset shall not exceed a width of...

3.05 metres

2.95 metres

3.25 metres

2.85 metres

28 / 30

Trailers registered in a commercial class (TS), dollies, jeeps and boosters equipped with air brakes must be periodically inspected...

Every 12 months

Every 6 months

Every month

Every 90 days

29 / 30

A tie-down device on the side of a vehicle may extend how far past the width prescribed in the regulations or in a permit?

18 cm

12 cm

10 cm

15 cm

30 / 30

When are clearance lights located at the extremities and along the edges of over-dimension loads required?

When traveling along narrow roads

When traveling along hilly rural roads

For travel during the night or in periods of reduced visibility

All of these

Your score is

Saskatchewan Professional Driver Test 05

About

Practice Tests

Getting a License

Get In Touch