Saskatchewan Professional Driver Test 06

By using this practice test, you’ll better understand what areas you need to work on before the actual test day. With diligent studying and practice, you can pass your official exam with flying colors! Plus, your thorough preparation will make you feel more knowledgeable and confident on the road.

1 / 30

Which answer is false? While inspecting the hubs, they must not be...

Cracked

Bent

Distorted

Old

2 / 30

While checking the steering during a heavy trailer endorsement inspection, what should you look for?

Power-assist

All of these

Power

Excessive free play

3 / 30

When conducting a heavy trailer inspection, what has to be inspected?

The truck and trailer

The trailer brakes

Just the trailer

Only the section that connects the trailer to the truck

4 / 30

While inspecting coupling devices (fifth wheel, pintle hitch, draw bar or ball hitch), which of the following is not checked?

Safety chains attached to the trailer cannot be rusted

Coupling device must be securely attached to the vehicle

Must be properly coupled to the trailer

Must be in the locked position and locked by the applicable locking device such as a pin or jaws of a fifth wheel

5 / 30

Are class 3 vehicles required to have mud guards?

Yes

Just in winter

Only in spring and fall

6 / 30

When performing a class 2 bus trip inspection, which fluid is not checked?

Brake fluid

Engine oil

Engine coolant

Power steering fluid

7 / 30

While inspecting windshield wipers and washer for a class 4 vehicle inspection, which of the following is not inspected?

Turn on the windshield washer to make sure it works properly

Check the wipers for damage

Make sure they wipe properly

Check for correct size

8 / 30

Where would you need to check for fluid leaks?

All of these

Under the vehicle

At the gas tank

From the filler cap

9 / 30

While inspecting the tires of a heavy trailer endorsement, which of the following is not checked?

Proper inflation

Missing valve stem cap

Damages, cuts or bulges on the sidewall

Tread separation

10 / 30

Which statement is false? While inspecting the heavy trailer, check all suspension components on each axle including...

Loose U-bolts

Leaking shocks

Cracked or broken springs

Deflated air bags

11 / 30

While inspecting the trailer of a class 1 vehicle, with the trailer emergency brakes applied and the truck park brakes released, what is needed to test the emergency application of the trailer brakes?

Firmly press the accelerator

Shift into neutral and see if it rolls

Try to gently pull away

All of these

12 / 30

While checking the steering, what should you look for?

Free play

All of these

Power-assist

Power

13 / 30

Which answer is false? All mirrors must be...

Unobstructed

Working

Clear

Not damaged

14 / 30

While inspecting the rims of a class 3 vehicle, what are you looking for?

Wrong size

Rust

Damage or cracks

All of these

15 / 30

While inspecting the engines belts for a class 4 vehicle, which of the following is not checked?

Cracks and fraying

Wear

Size

Tension

16 / 30

Which statement is false? While inspecting the landing gear and handle of the heavy trailer, Landing gear must be...

Not missing

Raised

Secure

Not damaged

17 / 30

What would indicate a loose lug nut?

Squeaking

Rust or shiny rings around the contact surfaces

All of these

A missing lug

18 / 30

While inspecting the tractor of a class 1 vehicle, with the truck park brakes applied and the trailer emergency brakes released, what is needed to test the application of the truck park brakes?

Shift to neutral and see if it rolls

Try to gently pull ahead

All of these

Firmly press the accelerator

19 / 30

While inspecting hoses for a class 4 vehicle, which of the following is not checked?

Poor connections

Fraying

Leaks

Engine oil

20 / 30

A minimum of how many flares/reflectors must be present if vehicle is wider than 2,060 mm and being operated outside corporate limits of an urban municipality?

Three

Eight

Five

Two

21 / 30

While inspecting the rims of a heavy trailer endorsement, what are you looking for?

Damage or cracks

Rust

Wrong size

All of these

22 / 30

When testing the truck service brakes, what should be done?

Release the hand valve, drive slowly ahead and make a foot brake application using the foot valve

Release the hand valve, drive quickly ahead and make a foot brake application using the hand valve

Release the hand valve, drive quickly ahead and make a foot brake application using the foot valve

Release the hand valve, drive slowly ahead and make a foot brake application using the hand valve

23 / 30

While inspecting windshield wipers and washer for a heavy trailer endorsement inspection, which of the following is not inspected?

Check for correct size

Check the wipers for damage

Make sure they wipe properly

Turn on the windshield washer to make sure it works properly

24 / 30

While inspecting the brakes on a class 3 vehicle, which of the following is not inspected?

Excessive wear inside the drum

Excessive wear on discs

Excessive wear on the pedal

Must not exceed manufacturer's wear limit

25 / 30

When testing the trailer service brakes, what should be done?

Release all park brakes, drive slowly ahead and apply the trailer brakes using the hand valve (spike), if equipped

Release all park brakes, drive quickly ahead and apply the trailer brakes using the hand valve (spike), if equipped

Release all park brakes, drive quickly ahead and apply the trailer brakes using the foot valve

Release all park brakes, drive slowly ahead and apply the trailer brakes using the foot valve

26 / 30

While inspecting the tires of a class 3 vehicle, which of the following is not checked?

Damages, cuts or bulges on the sidewall

Tread separation

Valve stem cap

Proper inflation

27 / 30

While inspecting the engines belts for a heavy trailer endorsement, which of the following is not checked?

Wear

Size

Tension

Cracks and fraying

28 / 30

If there are multiples of the same item on the vehicle, should you inspect each item the same way?

Only do the important ones

Yes

Do half of them

29 / 30

While inspecting the doors of a class 3 vehicle, which of the following is not inspected?

Must be securely fastened to the vehicle

Must open and close properly

Hinges are secure and worn

Must not be damaged

30 / 30

While inspecting the switches inside the cab of a class 3 vehicle, does the engine need to be running?

Only for select switches

No, but the key should be switched on

None of these

Yes, definitely

Your score is

Saskatchewan Professional Driver Test 06

About

Practice Tests

Getting a License

Get In Touch