Saskatchewan Professional Driver Test 05

Suppose you’re preparing to take your Saskatchewan Commercial Driver Licence Test or Saskatchewan Truck Driver Test. In that case, it’s essential that you feel confident and well-prepared before sitting for the official exam. One way to increase your preparedness is by taking advantage of the free SASK Driver Practice Test. This resource can help you familiarize yourself with the format and types of questions you can expect to find on the actual exam.

1 / 30

Power Units registered in a commercial class (A, C, D or LV) at or above 11,794 kg and operating extra-provincially must be periodically inspected...

Every 12 months

Every 6 months

Every month

Every 90 days

2 / 30

Which statement is false? While inspecting a class 1 vehicle on a daily inspection, all suspension components on each axle must be secure and not damaged, including...

Leaking shocks

Air bags are too firm

Cracked or broken springs

Loose U-bolts

3 / 30

Trailers registered in a commercial class (TS), dollies, jeeps and boosters equipped with air brakes must be periodically inspected...

Every month

Every 90 days

Every 12 months

Every 6 months

4 / 30

A fire extinguisher must be present in commercial vehicles wider than...

1,900 mm

2,140 mm

1,980 mm

2,060 mm

5 / 30

A tridem axle group or tandem axle group manufactured after June 1988 must not have a width less than how far measured from outside to outside tires?

2.5 m

2.1 m

2.8 m

1.9 m

6 / 30

During a trip inspection for class 1, which of the following is not checked with the belts?

Wear

Cracks and fraying

Tension

Age

7 / 30

Trucks registered in a commercial class (A, C or D) at or above 22,000 kg, operating within Saskatchewan only must be periodically inspected...

Every month

Every day

Every 6 months

Every 12 months

8 / 30

Which statement is false? All fluids must be at a safe operating level, including...

Windshield washer fluid

Engine oil (check when engine is hot)

Power steering fluid

Engine coolant (do not remove radiator cap)

9 / 30

During a trip inspection of the hoses for class 1, which of the following is not checked?

Leaks

Poor connections

Proper size

Fraying

10 / 30

When are clearance lights located at the extremities and along the edges of over-dimension loads required?

For travel during the night or in periods of reduced visibility

All of these

When traveling along hilly rural roads

When traveling along narrow roads

11 / 30

While inspecting the battery on class 1 vehicles, which of the following is not part of the daily inspection?

Make sure the battery compartment cover is on and securely attached

Check for corrosion and leaks

Check the water level in the cylinders

Make sure the batteries and the battery cables are secure

12 / 30

A building, object or contrivance must not exceed how many metres in width?

2.3 metres

3.2 metres

2.9 metres

2.6 metres

13 / 30

Which inspection schedule applies only to a motor coach equipped with air ride suspension, air brakes and automatic brake adjusters?

Schedule 3

Schedule 2

Schedule 4

Schedule 1

14 / 30

Which inspection schedule do trucks, tractors and trailers or combinations of them exceeding a GVW or RGVW of 11,794 kg require?

Schedule 4

Schedule 1

Schedule 5

Schedule 2

15 / 30

While inspecting a class 1 vehicle's accelerator on a daily inspection, after pressing and releasing the accelerator, what are you looking for?

Binding or sticking

The amount of rpm

The sounds of the rpm

All of these

16 / 30

While inspecting the fuel tanks on class 1 vehicle, which of the following is not part of the daily inspection?

Fuel lines are secure and there is no fuel leaking

Tank is secure and the straps are not loose

Fuel cap is on and secure

There is no excessive odor

17 / 30

While inspecting tires on class 1 vehicle, which of the following is not part of the daily inspection?

Damages, cuts or bulges on the sidewall

Tread separation

Adequate tread depth

Ensure the tires are touching each other

18 / 30

A tandem axle group on a semi trailer manufactured after December 1991 must not have width less than how many metres measured from outside to outside tires?

1.8 metres

2.8 metres

2.5 metres

2.1 metres

19 / 30

When should truck operators report to weigh scales?

When so directed by an official highway sign

When it's scheduled

At the beginning of a run

Weekdays

20 / 30

Liquefied Petroleum Gas (LPG), Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) must be periodically inspected...

Every 12 months

Every 5 years

Every 6 months

Every 3 years

21 / 30

What is the maximum height of a vehicle, building, object or contrivance is unless otherwise expressed in a permit?

4.35 metres

3.75 metres

3.85 metres

4.15 metres

22 / 30

While inspecting the brake pedal, the total pedal travel does not exceed how far of the total available travel when heavy force is applied?

90%

60%

75%

80%

23 / 30

Amber flashing lights are required on most units carrying what type of load?

Flammable

Toxic

All of these

Over-dimension

24 / 30

Before beginning a class 1 trip inspection, which of the following is not done?

Block the wheels

Turn the lights on

Set the parking brakes

Shut off the engine

25 / 30

A bus / van registered in a commercial class (PC, PB and PS), operating within Saskatchewan only must be periodically inspected...

Every 6 months

Every 90 days

Every 2 years

Every 12 months

26 / 30

A house trailer being moved between sunrise and sunset shall not exceed a width of...

3.05 metres

2.95 metres

2.85 metres

3.25 metres

27 / 30

Which inspection schedule applies to buses used for the transportation of passengers with a designated seating capacity of more than 10, including the driver, but excluding the operation for personal use, and also applied to any trailer towed by a bus?

Schedule 2

Schedule 5

Schedule 3

Schedule 1

28 / 30

Which of the following vehicle do not require a daily inspection?

Any trailers or semi-trailers being towed

Buses with a seating capacity of more than 10 people

All commercial vehicles (trucks/power units) with a registered gross vehicle weight of more than 11,794 kg

Vans with a cargo capacity of more than 500 cubic feet

29 / 30

A tie-down device on the side of a vehicle may extend how far past the width prescribed in the regulations or in a permit?

15 cm

18 cm

10 cm

12 cm

30 / 30

Which of the following information is not required in a daily inspection schedule?

Licence plate or unit number of the vehicle and any trailers being towed by that vehicle

Driver's license number

Inspection date and time

Odometer reading of the vehicle

Your score is

Saskatchewan Professional Driver Test 05

About

Practice Tests

Getting a License

Get In Touch