Ontario Air Brake Test 08

As a potential commercial driver in Ontario, it is important to demonstrate proficiency in air brake systems before getting behind the wheel. The Ontario air brake practice test is an invaluable resource in preparing for the required written examination. The test evaluates a candidate’s knowledge of air brake systems, including mechanics, components, and operation. The test also covers safety rules and regulations regarding air brake systems. Taking the practice test is a great way to identify gaps in knowledge and build the skills necessary to succeed on the real examination. With the right preparation and study, passing the Ontario air brake test can unlock exciting new career opportunities and lead to a rewarding career as a commercial driver.

1 / 30

While inspecting brake adjustment, the pushrod marks must be...

Narrow and precise

Approximate

With an arrow

Thick

2 / 30

Since adjustment limits vary depending on the size and type of air brake chamber, what must you be able to identify?

The particular brake chamber in use

The size of clevis pin being used

The type of pushrod being used

The slack adjuster being used

3 / 30

Each air brake chamber's pushrod stroke must not exceed...

The length of the pushrod

The size of the brake chamber

It's capabilities

The specified adjustment limits

4 / 30

Which statement is false? Some body design and suspension of some vehicles may limit safe access to the air tanks and drains unless...

The vehicle is over a pit

The vehicle is on a ramp

The vehicle is supported on a hoist

The driver crawls on a creeper

5 / 30

Which statement is false? If you are performing a brake-inspection inspection as part of a practical examination, you must know your vehicle's brake chamber size and type and bring the following items...

A chart of adjustment limits

A means of marking the pushrod if this method will be used

A means of applying the spring brakes

A means of measuring the applied pushrod stroke

6 / 30

Can brake-stroke indicators be fitted to the brake linkage?

Yes

Only with fire trucks

On older vehicles only

7 / 30

How many methods are available to measure applied pushrod stroke?

Four

Two

One

Three

8 / 30

When inspecting the air-tank drain valves, you should drain the supply tank until what happens?

Only sludge is visible

All of the moisture is discharged

It discharges only clean air

All of the above

9 / 30

The type of brake chamber also affects the specified brake adjustment limit, which can vary by how many millimetres between standard and long-stroke brake chambers?

12 millimetres

19 millimetres

15 millimetres

10 millimetres

10 / 30

Brake wear occurs at varying rates, depending on what?

The type of vehicle and driving conditions

The age of the brakes

All of the above

The manufacturer's recommendations

11 / 30

When testing automatic application of the trailer spring brakes and uncertain that the trailer spring brakes have applied, what should you do?

Shift to a low gear

Turn off the engine

Gently add engine power to confirm brake application

Gently reduce engine power to confirm brake application

12 / 30

What happens when brakes with manual slack adjusters are out of adjustment?

The vehicle is placed out-of-service until adjustments are made

The rotors must also be inspected

They must be re-adjusted so that the pushrod stroke is less than the adjustment limit

All of the above

13 / 30

What does an air dryer purge also signal?

Low air pressure

All of the above

Compressor cut-out

A malfunction

14 / 30

The most visible and permanent of the markings used to identify long-stroke brake chambers are...

The circular ports

The square ports

The hexagon ports

The round ports

15 / 30

The vehicle fails the air-tank drain valves test when...

All of the above

Any drain valve is missing

Any drain valve looks different

Any drain valve fails to function properly

16 / 30

When testing the low-air warning device, how often should you press and release the brake pedal?

you don't

twice and then leave it and watch

once and hold it down

several times until the low-air warning device activates

17 / 30

Automatic slack or brake adjusters are used for...

All of the above

Saving the driver time during inspections

Saving wear on the brake chambers

Avoiding the need to regularly perform manual brake re-adjustment

18 / 30

When testing the tractor (towing vehicle) protection valve, you should note whether the air exhausts from where?

The two-way valve

The trailer service-line coupler

The brake chamber ports

The foot valve

19 / 30

Which statement is false? While inspecting brake adjustment, mark the pushrod at the brake chamber or a suitable fixed reference point with what?

Soapstone

Chalk

Marker

Carpenter pencil

20 / 30

When testing the tractor (towing vehicle) protection valve and are concerned that the vehicle has no anti-compounding valve, what should you do?

Ensure the vehicle is secure and release the spring brakes before applying service brakes

Re-check to ensure you do

None of the above

Apply the spring brakes first

21 / 30

Who should repair and perform brake re-adjustments on manual slack adjusters?

Vehicle owners

Certified technicians

Drivers

Carriers

22 / 30

When testing air-loss rate, why should you disregard the initial pressure drop?

It has moisture in it

To ensure the pressure has stabilized

It's free play

It's not compressed air

23 / 30

Which statement is false? Long-stroke brake chambers can be identified by the following visible characteristics...

A trapezoidal tag is placed under the clamp bolt that indicates the brake chamber's maximum stroke dimension

The air hoses thin out as they approach the brake chamber

Markings are placed on the brake chamber body to indicate that it is a long-stroke brake chamber, and only long-stroke diaphragms are to be used as replacements

The air lines attach to a square port in the brake chamber body

24 / 30

Brake chamber pushrods are generally marked with what?

Some type of indicator that becomes visible when pushrod stroke exceeds the adjustment limit

None of the above

Markings on the wall of the housing

Grooves along the pushrod

25 / 30

Which statement is false? Inspect brake chambers at each wheel for...

Cracks and non-manufactured holes

Visual air leaks

Mismatched air brake chamber size on a steering axle

Mismatched slack-adjuster length on a steering axle

26 / 30

What happens to the brake pushrod stroke as the brakes wear?

It increases

The reduces

It must be replaced

Nothing happens

27 / 30

The most common brake chamber size is...

28 / 30

Which of the following is not a required step for testing the air-tank drain valves?

Watch the discharge from each air-tank and ensure that all air-tank drain valves function properly

Locate and drain the remaining air tanks

Ensure that the air brake system is below its normal operating pressure range

Locate and drain the supply tank until the valve discharges only clean air

29 / 30

What would happen to the vehicle if the driver were operating a vehicle with defects or failing to conduct the required inspections?

None of the above

Ticketed

The safety certificate is removed

Impoundment of the vehicle

30 / 30

While inspecting the vehicle, why should you park on level ground?

It will give proper readings while inspecting the vehicle

All of the above

It will give you the best view while inspecting it

It will reduce the possibility of unexpected vehicle movement

Your score is

Ontario Air Brake Test 08

About

Practice Tests

Getting a License

Get In Touch